Dustless Sanding & Refinishing

Hardwood floors are the largest piece of furniture in your home – which means that it should get the highest level of care and attention. One of the greatest benefits of hardwood flooring is the ability to revive it with refinishing. Even if your flooring is looking shabby or dull, refinishing the floor can make it look like new again.

Knowing When to Sand

Hardwood floors expand and contract with temperature and humidity changes over the years, eventually making an uneven surface. They can also suffer surface damage, such as scratches, yellowing with age, paint, or food or chemical stains. Dustless Sanding and refinishing can correct this and make your hardwood look like new.

sanding-and-refinishingBecause this process removes a portion of the surface wood, you can only do it a few times before the boards become too thin. In addition, while sanding any floor can be tricky, sanding floors that are less than 3/4 inch thick is especially difficult. That’s why, at Floor Boys, we’ll do a free in-home assessment to make sure your hardwood floors are prime for sanding and refinishing.

The DUSTLESS Sanding and Refinishing Process

At Floor Boys, we’re proud of our dustless sanding process. In addition to reinvigorating your hardwood floors, we’ll leave your home in the same condition we found it – without the dust and debris that you may have heard about other flooring companies leaving everywhere.

After consulting with our experts, if you decide to get your hardwood sanded and refinished, this is how the process will go:

1. Prep. If needed, we’ll remove furniture from the area and cover all electrical outlets, vents, and light fixtures for protection.

2. Sanding. Using 99% dustless sanding equipment, we’ll sand the floors down to the bare wood. As we sand, we’ll immediately follow with a special 4-stage vacuum to catch any other dust that may be left behind.

3. Stain. Once the hardwood is ready, we’ll apply a coat of stain, which provides the color for the wood.

4. Sealing. We start with two coats of Bona water-based polyurethane sealant, which doesn’t have the strong smell, doesn’t cause burning, and is more environmentally friendly than other sealants. Then we’ll finish with another coat of polyurethane on top of that.

Buffing & Recoating: An Earlier Alternative

If your hardwood floors don’t need the full effort of sanding and refinishing, the way to care for more minor issues is a process called buffing and recoating, which takes half the time and money as sanding and refinishing.

Instead of fully sanding down the stain and even the wood, buffing just takes off the old, top layer of your hardwood’s finish, and recoating replaces it with a new layer. When done every 5-10 years, it can extend the life of your hardwood floors and put off the need for sanding and refinishing.

Call Floor Boys 803-359-0507

If you’d like to reinvigorate your hardwood floors, call Floor Boys for an assessment. We can help you determine whether you need a sanding and refinishing or if a buffing and recoating would better help your hardwood.